Steering Tube Cutting Guide

Steering Tube Cutting Guide2018-11-19T05:45:04+00:00

Project Description

Steering Tube Cutting Guide

  • Precisely cut steering tubes to the exact length the first time!
  • Just measure the stem clamping tube and set it on the calibrated fixture.
  • The fork is cut right on the frame, no guessing.
  • A sharp hacksaw blade is mandatory!

Used to cut steering tubes precisely to the correct length. The fork is installed into the frame with the headset and this tool is installed in place of the stem with the length of the stem set by using the calibrated slider. The tube is then cut through with a sharp hacksaw.

CG3-CAL   $45.00